Removes and prevents staining/scaling of Spa and Pool Surfaces.

Solution containing Amino-tri (methylene phosphonic acid.)

Mineral precipitation can cause stain and scale deposits that can build up on pool surfaces under certain pool water conditions. Stain and scale inhibitor is a sequestering agent that helps prevent dissolved solids from precipitating.

Directions for use:

1. Stain and Scale inhibitor is very concentrated, for initial dose dilute 150ml per 1m3 (1000 litres) and then top up with 50ml per 1m3 (1000 litres.) Use on a regular basis, once every two weeks or more if required.
2. Following the instructions below, pour evenly around the edge of the pool or spa.
3. For visible stains or scale, dilute 250ml per 1m3 for spas. Brush affected area after application. More than one application may be required.
4. Some temporary cloudiness may be evident. Run filter as normal and continue until water clears.

Never mix with any other chemicals including cleaning products, weedkiller and chlorine products, as a dangerous reaction may occur. Always handle products in a well ventilated area, preferably outdoors.

Always shake bottle before use. Always wash hands after handling chemicals. Store in a cool dry place.