These granules are the ideal product for shock dosing or regular oxidisation of pool water. However, they can also be used for routine disinfection.

Application Instructions:

1. Maintain pH levels within the ideal range between 7.2-7.6. If the level is not in this range please adjust accordingly.
2. Maintain free chlorine residuals routinely in the 1-3 mg range. Shock or oxidising procedures are recommended either weekly or fortnightly with a maximum of 10mg for a full shock treatment.
3. Pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallon/10 litres of water. Stir well to ensure the product has dissolved fully. Add the resulting solution to the pool whilst the pump or pumps are turned on, near the water inlets to aid distribution.
4. Repeat dose/application if necessary to achieve the desired level.
5. After using this product, pool water may become cloudy so keep the filtration pump running until the water clears.
6. After shock treatment procedures allow the chlorine to drop below 5 ppm before bathing recommences and in any event wait for at least 30 minutes.

Please see the back of the container for full details and dosing rates. Handle products in a well-ventilated area with any protective clothing. Keep out of reach of children.